Fix your unresponsive iPhone with these steps.

Smartphones are an almost essential part of life, so your iPhone freezing and becoming unresponsive, especially at an inopportune moment, is a huge problem. Unless it’s a significant hardware issue, simply restarting the iPhone should do the trick, but diagnosing the cause of the problem to stop it from happening again might take longer.

There is nothing new about the problem of iPhone getting frozen or unresponsive as it has existed on almost all iPhone models. The issue has affected many iPhone models, including iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS, XS Max, iPhone 11, 11 Pro, 11 Pro Max, iPhone 12, 12 mini, 12 Pro, 12 Pro Max, iPhone 13, 13 mini, 13 Pro, 13 Pro Max, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max and iPhone SE. Thankfully, our troubleshooting guide will show you what to do if your iPhone is frozen or unresponsive.

Understanding the cause of the problem is key to finding a possible solution. Hence, we have first talked about what could be the possible reason why some iPhones freeze or become unresponsive before learning the different ways to resolve the issue.

Why is iPhone freezing or unresponsive

There are a few reasons why your iPhone freezes and becomes unresponsive often. With newer iPhones, it’s more than likely a software issue caused by a problematic system or third-party app. Lack of storage space might also cause your iPhone to freeze, mainly when performing tasks that require storage, like taking photos.

iPhones that are a few years old might not have a powerful enough processor to handle processor-intensive apps and games or even the latest version of iOS. Extreme temperature is also a problem, especially when iPhone gets too hot or too cold.

Hardware problems are a less common cause for a frozen iPhone, but issues with the touchscreen might make the iPhone appear unresponsive. If it is a hardware issue, your only option is to contact Apple Support or an authorized service center to get the iPhone repaired or replaced.

8 potential fixes for a frozen iPhone

1. Restart your phone

Before you can figure out why your iPhone is freezing, the first thing to do is to get it up and running again. You can restart the iPhone by pressing and holding the power button and either of the volume buttons. When the power slider appears, drag it from left to right to shut down your iPhone. Now, press the power button until the device reboots.

If the normal restart doesn’t work, force restart your iPhone by pressing and holding the volume up key followed by the volume down key. Finally, press and hold the Side button. Keep holding the side button until you see the Apple Logo.

2. Charge your iPhone

If your iPhone doesn’t start after you press and hold the power button, plug it into the charger and wait before trying to restart it. Your iPhone might be unresponsive because it has run out of battery. There are also known software bugs that might cause your phone to shut down and not start when the battery is close to running out but not at zero.

You might have other problems if your iPhone isn’t charging at all. If that’s the case, try these fixes to help solve your iPhone’s charging issues.

3. Check your iPhone’s storage

Lack of enough storage space might make your iPhone not work correctly or freeze completely. Go to Settings > General > iPhone Storage to see how much space is available. If you are close to running out (under 10% of the total storage), you will need to delete some files and unused apps to clear up space.

iPhones offers offload unused apps option in the Storage section. This will automatically remove unused apps when you’re low on storage. Your documents & data will be saved.

4. See if an app is causing your iPhone to freeze

Problematic apps might freeze and make your iPhone unresponsive. If only the app is frozen, but you can access the rest of the phone, try to close the app.

1. Swipe up from the bottom of the screen to bring up the app switcher.
2. Swipe up on the problematic app to close it.

It might also help to check if this app has an update available. If the application isn’t up to date, it could be having bugs causing your iPhone to freeze. Follow the steps below to update your apps:

1. Open the App Store.
2. Tap on your profile icon in the upper right corner of the screen.
3. Scroll down and install any available app updates.

If you tried closing, reopening and updating the app, and your iPhone gets frozen while using the app, we suggest deleting it and trying to find an alternative app. To do this, follow the steps below:

1. Press and hold on the problematic app icon.
2. Tap Remove App.
3. Tap Delete App.
4. Tap Delete to confirm.

5. Update your iPhone

Don’t forget to update your iPhone software. An iOS update usually come with bug fixes to help solve problems that might cause a frozen and unresponsive iPhone. To do so. Follow the steps below:

1. Go into Settings.
2. Tap on General.
3. Choose Software Update.
4. If an update is available, hit Download & Install.

6. Make sure it’s not too cold (or too hot)

Some iPhone components can be sensitive to temperature, and if you are using your iPhone in extreme temperature conditions, such as in freezing temperatures or in blistering summer heat that’s over 100 degrees, the touchscreen might misbehave (or other components on the iPhone might start to temporarily fail). Wait until you can use the iPhone in more nominal temperature conditions and see if that solves the problem.

7. Factory reset your phone

If nothing works, your only option might be to factory reset your iPhone. This step is the last resort since it will completely erase your phone. Before resetting your device, don’t forget to back up your iPhone.

1. Start the Settings app on your iPhone.
2. Go into General.
3. Tap on Transfer or Reset iPhone.
4. Hit Erase All Content and Settings.

8. Hardware problems

There isn’t much you can do if your iPhone is frozen or unresponsive because of hardware problems. Contact Apple Support or an authorized service center to repair any issues with the touchscreen not working or other hardware problems. You might need to get a replacement if a repair isn’t possible.

There’s no need to panic if your iPhone speakers are not working. Work your way through these ten fixes to get your iPhone’s speakers working again.

An iPhone with broken or muffled speakers isn’t of much use. You won’t be able to listen to music, play a podcast, or most importantly, hear what the person on the other end of the line is saying.

There is nothing new about the problem of iPhone speaker not working as it has existed on almost all iPhone models. The issue has affected many iPhone models, including iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS, XS Max, iPhone 11, 11 Pro, 11 Pro Max, iPhone 12, 12 mini, 12 Pro, 12 Pro Max, iPhone 13, 13 mini, 13 Pro, 13 Pro Max, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max and iPhone SE. Thankfully, the troubleshooting steps explained in this guide will help you fix iPhone speaker problem for good!

Getting a good hang of the problem is key to discovering the cause and finding a possible solution. Therefore, we have first talked about what could be the possible reason why some iPhones speaker is not working before learning the different ways to resolve the issue. Lets get started.

Why are iPhone speakers not working?

If your iPhone speakers are not working, there could be an issue with the audio settings or with the speakers, themselves. If you’re using a headset, that might be the cause.

Don’t panic, though, as we’ve done the heavy lifting for you. Here’s how you can fix the sound on your iPhone if your speakers have stopped working.

How to fix iPhone speakers not working issue

1. Check the sound settings on your iPhone

The first troubleshooting step if your iPhone speakers are not working is to check your sound settings on your phone. There’s a good chance that you turned the volume down and not even realized it. Follow the steps below:

1. Open Settings.
2. Tap Sounds & Haptics. Here, Drag the slider to increase the sound volume.

2. Reboot your iPhone

If your iPhone speakers are not working after trying the above solution, the next troubleshooting step is to simply perform a reboot. This will restart all background services and give your phone a clean start in case a minor software glitch has caused the speaker on your iPhone to stop working. Follow the steps below:

1. Open the Settings app on your iPhone.
2. Tap General.
3. Select Shut Down.
4. Power on your iPhone and check if the speakers are working as expected.

3. Could Your Bluetooth Headset Be the Problem?

When a cable is plugged into your iPhone, it’s obvious that an external device is connected. With Bluetooth, however, it’s easy to forget.

For example, I occasionally use Bluetooth headsets with my iPhone. When I’m not using them, I don’t always keep in mind to swap the playback device. Consequently, audio gets streamed to the headphones, but not my iPhone’s speakers.

If your iPhone speaker is not working during a call, you need to examine whether your phone’s audio output is set to the built-in speaker. Simply bring up the Control Center to check if your iPhone is connected to any Bluetooth audio outputs.

Next time you use Bluetooth headsets, remember to switch them off or disconnect the device from your iPhone when not in use.

4. Still No Sound From Your iPhone Speakers? Update iOS

Made all the checks to your audio settings and still getting no sound from your iPhone speakers? Then it’s time to try a software solution. Remember the last time you updated iOS? If not, this might be the right time to do so. Follow the steps below:

1. Go to Settings.
2. Tap General.
3. Select Software Update.
4. If an update is available, tap Download & Install.

5. Clean the Speaker Grills

If you are not aware, dust or the pile-up of smudge are also capable of inhibiting the iPhone’s speakers from working properly. If you haven’t cleaned your iPhone for a while, there is a good chance that the pileup of dust could be blocking the speakers. Thankfully, it’s pretty easy to clean iPhone’s speakers.

Start by blowing air into the speakers, either using your mouth or a can of compressed air. Apart from that, you can try to suck small crumbs and bits of dust out using a vacuum cleaner. This could affect your phone’s internals, though, so you should proceed with caution if you attempt this solution.

Another good option is gently scrubbing the speaker grills with a toothbrush or a soft bristle brush, and giving the device a good shake to loosen up the dirt.

6. Check that your iPhone isn’t stuck in headphone mode

It’s possible that your phone is “stuck” in a mode in which it thinks it’s playing audio, but it’s sending it to a device that isn’t connected, like earbuds that aren’t plugged in or a Bluetooth device that isn’t turned on.

Here are a few troubleshooting steps you can try to “wake up” your iPhone’s audio connection so it’s working properly:

• Reconnect your headphones then disconnect them again. Repeat this three or four times to loosen any dirt within the port. Then give your iPhone a good shake to let loose debris fall out.
• If you have Bluetooth headphones, connect and disconnect your headphones by going to Settings > Bluetooth. When you disconnect your headphones, your iPhone should automatically switch back to using the internal speakers.

7. Reset All iPhone Settings

At times, a software glitch can also lead to iPhone speaker issues. To check and see if this is the case, reset all iPhone settings. This will fix any software bugs that might be dwelling within your iPhone’s code. Follow the steps below:

1. Open Settings.
2. Go into General.
3. Select Transfer or Reset iPhone.
4. Tap Reset.
5. Tap Reset All Settings.

8. Perform a factory reset

If your iPhone speaker not working issue persist, it’s time to reset your iPhone to factory settings. Doing this can be a pain, but it’s recommended to make sure there are no prevalent software glitches.

A factory reset will completely wipe your iPhone, and the complete operating system will be set to its default settings. Factory reset might also work if your iPhone speakers stopped working after an app download or a jailbreak attempt.

To restore your iPhone to factory settings, first, you’ll need to back up your device. Then follow the steps below:

1. Go to Settings.
2. Go into General.
3. Select Transfer or Reset iPhone.
4. Tap Erase All Content and Settings.

This will wipe your phone clean and essentially make it like new. Before restoring a backup, go into the device and test the speakers. If they work, restore your backup.

There are some cases where restoring your backup might make them not work again. If that’s the case, it might have been an app you tried to download or your backup could be corrupted. Sadly, this means starting from scratch, unless you have an older backup you can try restoring. If your photos and contacts are in iCloud you won’t need to transfer those over manually.

9. Did your iPhone fall in water?

Water in speakers will cause the audio to sound muffled. An iPhone with muffled speakers isn’t of much use. You won’t be able to listen to music, play a podcast, or most importantly, hear what the person on the other end of the line is saying.

So how do you fix it? You could try using a can of compressed air, but you need to be careful. If you hold the nozzle too close the speaker, you might irreparably damage it.

10. iPhone Speakers not Working still? Repair options

You’ve checked the volume settings of your iPhone and cleaned the speakers. Everything appears to be okay. You’ve even updated the iOS and reset iPhone to factory settings.

You’ve made it this far, but there’s still no audio, and your iPhone speakers are not working. Well, it looks like it’s time to contact Apple support for further help.

Are Your iPhone’s Speakers Working Again?

Whatever the reason for your iPhone speakers not working, if you enjoy listening to music, podcasts, or any other audio media, then you know how working days on end without good background noise can get. Hopefully, one of these tips worked out for you, and your iPhone speakers are now blasting as usual.

Are your iPhone volume buttons stuck or not working? Try these ten fixes. You don’t have to be a tech wiz to fix the problem.

Are your iPhone volume buttons not working all of a sudden? iPhone volume buttons problems aren’t as uncommon as you may think. It happens to many users and can be extremely frustrating, especially for those who regularly listen to music or other audio media.

This post will guide you through some fixes that will, hopefully, solve the iPhone volume buttons problem you are experiencing.

There is nothing new about the problem of iPhone volume keys stuck or not working as it has existed on almost all iPhone models. The issue has affected many iPhone models, including iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS, XS Max, iPhone 11, 11 Pro, 11 Pro Max, iPhone 12, 12 mini, 12 Pro, 12 Pro Max, iPhone 13, 13 mini, 13 Pro, 13 Pro Max, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max and iPhone SE.

Fortunately, if your iPhone volume button is stuck or not working, you don’t have to book an appointment with Apple Genius Bar just yet. Here are a handful of troubleshooting steps and fixes you can try to revive your iPhone volume key if it’s stuck or not working. If the volume button is broken, we’ll also show you how to use an iPhone without volume buttons.

Without any further delay, let’s get started.

How to fix iPhone volume buttons that are stuck or not working

1. iPhone volume buttons stuck? Remove the Case

Believe it not, there are a ton of iPhone cases (especially the cheaper and rugged ones) that lack tactile buttons. So, if you have installed a case on your iPhone, remove it and press the volume buttons to check if they are working or not. If the volume buttons are working fine, your case was the cause of the problem and not your iPhone hardware.

2. Ensure the iPhone isn’t connected to an external device via Bluetooth

If you’ve paired the iPhone with wireless headphones, a speaker, or any other device via Bluetooth, the audio could be sent to those devices.

All you have to do is open up the settings app on your iPhone, find the Bluetooth button, and check to see if it’s on. You can also dig deeper into the settings and see which Bluetooth devices the iPhone is connected to.

If the iPhone is connected to an audio device via Bluetooth, you can try a couple of things. You can disconnect or forget audio devices, but the easiest solution is to turn Bluetooth off and try using the volume buttons. If your iPhone volume buttons still don’t work, you should move on to the next solution on this list.

3. Clean the volume buttons

As you can imagine, a lot of dust, as well as lint and other debris, can make its way into the opening around the volume buttons over time. This might cause the problem, as dirt can cause the iPhone’ volume buttons to get stuck.

The first thing you should do if your iPhone volume buttons are stuck or not working is to look into the buttons to see just how dirty they are. A flashlight might come in handy for this. The next step is to try and clean them and hope that solves the issue. There are many ways to do this, and some work better than others. One option is to blow into the volume buttons, which should take care of at least some of the dust and lint found inside. You can also use a can of compressed air if you have one nearby. Be very careful when doing this, as the last thing you want to do is cause more damage to the device.

Look into the volume buttons again to see how much dust and lint you cleaned up. If things look better, try adjusting the volume to check if everything works as it should.

4. Lock the ringer and alert volumes in Settings

1. Open Settings .
2. Tap Sounds & Haptics (on supported models) or Sounds (on other iPhone models).
3. Turn off Change with Buttons.

5. Restart your iPhone

If everything seems to be in order, but your iPhone’s volume buttons are not working, there’s another simple fix you can try, which is restarting your device. This can sometimes solve many smartphone-related problems and takes less than a minute. Just follow the steps below:

1. Open Settings.
2. Tap General.
3. Select Shut Down.
4. Press the power button to turn your iPhone back on, and then check to see if the volume buttons are working properly.

6. Adjust the volume in Control Center

When iPhone is locked or when you’re using an app, you can adjust the volume in Control Center.

Open Control Center, then drag the volume slider.

7. Use Siri to adjust the volume on iPhone

When you’re listening to songs, movies, or other media on iPhone, you can use Siri to turn the volume up or down.
Just activate Siri and say something like: “Turn up the volume” or “Turn down the volume.”

8. Make sure your iPhone is up-to-date

You might be running an old version of iOS on your iPhone. While this shouldn’t cause complications with volume buttons, it’s always worth keeping your iPhone updated to iron out potential problems. Follow the steps below:

1. Head to Settings.
2. Tap General.
3. Hit Software Update to see if a new iOS version is available.

If the problem lies in an app—for example, volume buttons working everywhere on your iPhone except when using a specific app—check whether there’s an update to install via the App Store. If not, you could contact the app developer and ask for advice.

9. Perform a factory reset

If your iPhone volume buttons are not working after trying the above steps, there is one last thing you can do before seeking professional help. A factory reset will completely wipe your iPhone, and the complete operating system will be set to its default settings. If the problem isn’t hardware, a factory reset should fix any software bugs that might be dwelling within your iPhone’s code. A factory reset might also work if your volume button stopped working after an app download or a jailbreak attempt.

To restore your iPhone to factory settings, first, you’ll need to back up your device. Then follow the steps below:

1. Go to Settings.
2. Go into General.
3. Select Transfer or Reset iPhone.
4. Tap Erase All Content and Settings.

This will wipe your phone clean and essentially make it like new. Before restoring a backup, go into the device and test the volume buttons. If they work, restore your backup.

There are some cases where restoring your backup might make them not work again. If that’s the case, it might have been an app you tried to download or your backup could be corrupted. Sadly, this means starting from scratch, unless you have an older backup you can try restoring.

If your photos and contacts are in iCloud you won’t need to transfer those over manually.

10. Time to contact Apple Support

If none of the fixes above fixed your iPhone volume buttons problem, the issue isn’t as minor as hoped. If your iPhone is still under warranty, the best thing to do is contact Apple Support. Explain the problem to the company, and send it in for repair or replacement. This can take quite some time in some cases, but at least it’s free.

If the warranty has expired, you may have phone insurance. Just make a claim with your provider.

The third solution is the worst one. You may have to pay to get the iPhone volume buttons repaired by Apple or an authorized service center. You’ll have to open up your wallet and pay up, but at least you’ll be able to use the volume buttons again. Otherwise, you could opt for a pair of headphones. That isn’t truly a solution, but you will be able to control the volume of your iPhone.

Successfully fixed iPhone buttons not working issue

It can be annoying if your iPhone volume buttons are not working. Luckily, the solutions mentioned above will fix the problem in most cases, and you’ll be able to change your volume again in no time.

Is your iPhone showing a “No SIM card installed” error? Here’s how to fix the problem, step-by-step.

While an iPhone 14 model in the United States doesn’t have a SIM card, majority of iPhone models require a physical SIM card to make phone calls, send and receive text messages, and connect to the Internet while out and about. Unfortunately, the network connection can fail on your iPhone because of hardware and software issues.

There is nothing new about the issue of iPhone showing “no SIM card installed” error as it has existed on almost all iPhone models. The issue has affected many iPhone models, including iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS, XS Max, iPhone 11, 11 Pro, 11 Pro Max, iPhone 12, 12 mini, 12 Pro, 12 Pro Max, iPhone 13, 13 mini, 13 Pro, 13 Pro Max, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max and iPhone SE. Fortunately, if you are experiencing a “No SIM card installed” error on your iPhone, this troubleshooting guide will show you what you can do to fix it.

Why your iPhone might not detect a SIM card

There are a few reasons your iPhone might not detect a SIM card. It could be a problem with the SIM card itself. You might not have placed the SIM card in the tray correctly, or the card might be dirty or damaged. It could also be a problem with the iPhone’s software. There might be a problem with the network settings. Whatever the case, here’s what you can do to fix the “No SIM card installed” error on iPhone.

How to fix a “No SIM card installed” error on iPhone

1. Check the SIM card

The first step to fix the “No SIM card installed” error on iPhone is to check the SIM card. Remove the SIM card out of the tray and place it back carefully. It should sit flush with the tray and not pop out easily. Insert the SIM tray in the iPhone and check if the error goes away. A dirty or damaged SIM card might also cause this issue. Clean the SIM card before you insert it into the iPhone again. If it’s damaged, your only option is to get a new SIM from your network carrier.

2. Check the phone hardware

Ensure that the iPhone’s SIM tray isn’t bent or damaged. If the tray doesn’t release easily or you need to force it back into the iPhone, you might have to replace it. You can confirm whether it’s a hardware issue by checking the SIM card on another phone. If it works on other devices, you likely have a hardware problem. Contact Apple Support or an authorized technician to repair or replace your smartphone.

3. Software problems

If you’re getting the “No SIM card installed” error on your iPhone because of software problems, there are a few basic troubleshooting steps you can try.

• Restart the iPhone: Simply rebooting the phone might be enough to fix the problem. Go to Settings > General > Shut down. Check if the iPhone can read the SIM card after a reboot.
• Toggle Airplane mode: Try toggling Airplane Mode on and off to re-establish the phone’s network connections. Bring up the Control center on your iPhone and tap Airplane mode. You can also go to Settings and enable and disable Airplane mode.
• Reset network settings: You might have to reset your iPhone’s network settings if nothing else works. Go to Settings > General > Transfer or Reset iPhone > Reset > and tap Reset network settings. Keep in mind that this will also reset your Wi-Fi, Bluetooth and VPN settings.

4. Contact customer service

If you see the “No SIM card installed” error on a new iPhone, you might have to contact your network provider to see if there’s a network or settings issue. You likely need a new SIM card if the error pops up suddenly on your older iPhone. You can also contact Apple Support to check whether this is a known software problem and see if they can help out in any way.

Successfully fixed “No SIM card installed” error on iPhone

To fix the “No SIM card installed” error on iPhone, check if the SIM card is inserted correctly or if the SIM tray is bent or damaged. See if the SIM card works on another phone. If it doesn’t, you will need to contact your network provider to get a new one. If it’s a software bug, try restarting the iPhone, toggling Airplane Mode on and off, and resetting the iPhone’s network settings. You might have to pick up a replacement device if nothing works and the error doesn’t go away.

Is your iPhone charging port not working? Here’s what you can do to fix it.

An iPhone charging port that won’t work can be quite unsettling. Luckily, though, most issues with iPhone charging port can be resolved without mailing in your device to Apple for a specialized repair.

There is nothing new about the problem of iPhone not sending or receiving text messages as it has existed on almost all iPhone models. The issue has affected many iPhone models, including iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS, XS Max, iPhone 11, 11 Pro, 11 Pro Max, iPhone 12, 12 mini, 12 Pro, 12 Pro Max, iPhone 13, 13 mini, 13 Pro, 13 Pro Max, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max and iPhone SE. Thankfully, this troubleshooting guide will show you what to do if your iPhone charging port isn’t working.

Getting a good hang of the problem is key to discovering the cause and finding a possible solution. Hence, we have first talked about what could be the possible reason why some iPhone’s charging port is not working before learning the different ways to resolve the issue.

Possible reasons why your iPhone’s charging port isn’t working

From moisture to lint, there are plenty of reasons why your iPhone’s charging port won’t work. Luckily, most of these are short-lived events, which means you should be able to get up and running with a few simple fixes.

That said, repeated plugging and unplugging over time could also irreversibly wear out the charging port. If that’s the case, your only option will be to replace it with a new one. But let’s not get ahead of ourselves — here are a few things you can try if your iPhone charging port is not working.

6 ways to fix iPhone charging port problem

1. Check your iPhone’s charging port for debris

Over years of regular use, it’s common for sand, lint, and dust to build up in crevices like the iPhone’s charging port. Needless to say, debris can prevent the iPhone’s charging port from conducting electricity. In some cases, it can also block the iPhone from being able to communicate with the charging accessory, limiting fast charging. Luckily, fixing this issue is rather straightforward.

Use a magnifying glass and flashlight to take a closer look at the insides of your iPhone’s charging port.
If you see dust or other foreign objects, use a fine toothpick to clear them away. Be as gentle as possible since it’s possible to damage the lightening port permanently. Alternatively, use a can of compressed air if you’re unsure of causing damage.
Plug in your iPhone and check if the charging port is working.

2. Force your iPhone to restart

If your iPhone’s charging port worked just fine recently but it’s no longer working, the iOS may be experiencing a minor glitch. To fix the issue, simply force restart your iPhone by following the steps below:

1. Press and quickly release the volume up button.
2. Press and quickly release the volume down button.
3. Press and hold the Side button.
4. Release the Side button once the Apple logo appears.

Once the iPhone boots up successfully, plug it in immediately and check if the charging port is working.

3. Use a different adapter, cable, and outlet

If neither of the above solutions worked for you, your charging adapter or charging cable might be faulty. Topping up your iPhone’s battery multiple times a day can chew through the cable’s lifespan pretty quickly. Lightening ports and plugs can only withstand so many insertion cycles, after all. And that’s not even considering any damage or corrosion that could have built up over time.

Simply plug in your iPhone using a different charging adapter and lightening cable. And while you’re at it, ensure that there’s nothing wrong with your wall socket either.

4. Try wireless charging if your iPhone supports it

If you own recent iPhone models like the iPhone 14, iPhone 13, iPhone 12, iPhone 11, or iPhone X, don’t forget that you can also charge your device wirelessly. Any Qi wireless charger should do the trick, provided it’s from a reputable brand. Simply place your iPhone on the charging pad and wait a few seconds for the charging indicator to show up. If your phone can charge wirelessly, the charging port might be faulty and you should get it repaired.

5. Dry your iPhone if it was exposed to water

Many iPhone models feature IP67 or IP68 water resistance rating. In other words, they can withstand accidental spills and splashes as well as light rain. However, that doesn’t mean your iPhone is immune to water.

If water is detected inside the iPhone’s charging port, iOS automatically blocks charging as a precaution. So if your device was recently exposed to water, set it aside to dry out completely before plugging it in again.

6. Replace the charge port or battery

As we alluded to earlier, iPhone batteries and charging ports don’t last forever. It’s common for these components to degrade over three or more years of use — especially if you’re a heavy user. But that doesn’t mean you need to buy a new phone.

If your iPhone is still under warranty, Apple will replace the battery or charging port for free. If your iPhone is out of warranty, the repair cost is just a few dollars. That’s a good deal taking into account a new iPhone will cost you several times that amount.

Successfully fixed iPhone charging port problem

I hope your iPhone charging port problem is now resolved. Next time you find your iPhone charging port not working, keep in mind to check the port for debris or moisture and try charging with a different adapter and cable. If neither of those solutions work, you may have to replace the iPhone’s charging port.

Which of the above solutions worked for you? Drop a comment and let us know.

Is your iPhone not charging? Don’t freak out just yet! Let’s see if we can get your battery charging again.

It has been a long and busy day. You get home with a nearly dead phone battery and finally plug it in, only to find out the iPhone isn’t charging anymore! It’s normal to freak out for a bit, but don’t lose hope just yet.

There is nothing new about the problem of iPhone not charging as it has existed on almost all iPhone models. The issue has affected many iPhone models, including iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS, XS Max, iPhone 11, 11 Pro, 11 Pro Max, iPhone 12, 12 mini, 12 Pro, 12 Pro Max, iPhone 13, 13 mini, 13 Pro, 13 Pro Max, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max and iPhone SE. This troubleshooting guide will show you what to do if your iPhone is not charging.

First and foremost, let’s figure out the possible causes of the iPhone not charging issue. Once that’s done, we will move on and detail each solution.

Why is iPhone not charging?

Most iPhone charging problems are brought about by a faulty socket, cable, adapter, or even the charging port itself. Thankfully, Troubleshooting these problems is pretty easy. Work your way through these eleven fixes to get your iPhone charging again.

How to fix iPhone not charging issue

1. Is your charging cable in good condition?

An iPhone not charging could be due to many reasons, but the cable is usually the biggest offender. Especially if it’s an accessory you’ve had for a long time, possibly since the iPhone was purchased. Our cables go through plenty of torture. They go with you to many places, not to mention we can often step or trip on them, they often get tangled up, we throw them in bags carelessly, and so on.

Inspect your charging cable thoroughly and see if there are any evident signs of damage. Any rips, bends, cuts, or general damage will be a good reason for cables not functioning correctly. Also, try to charge another iOS device with it and see if it works. If it does, the issue might be the device. You can also try using another cable to see if it will charge your iPhone battery.

If you find out a damaged cable is the cause of your iPhone charging problem, throw it away and get a replacement. Just make sure that the new charging cable is MFi (Made for iPhone certified.

Uncertified or fake iPhone chargers tend to charge comparatively slow which often leads to overheating problems. And with the lack of trusted safeguards against threats like short-circuits, overcurrent, and overcharging, the uncertified chargers could also damage your device. So, make sure your charging cable has MFi certification.

2. How about the charging adapter?

Of course, the charging adapter is just as important as the cable. Go ahead and put it through the paces. Check if it has any physical damage. Cracks or bent outlets are obvious red flags. Likewise, try using it with other iOS devices and switching it with another brick to see if this is the problem.

3. Check your iPhone’s charging port

If your cable and charger are working perfectly with other iOS devices, it’s time to start inspecting your iPhone. A common culprit is the charging port. For starters, go ahead and check if there is any dirt or debris in the port. Something as simple as a dirty port can cause charging issues on iPhone. You can try cleaning the charging port with a brush or compressed air.

Have you noticed the lightening port feeling loose lately? Ports can get worn out with excessive usage. You could also find signs of corrosion in there. Sadly, there isn’t much you can do about this, other than replacing the iPhone or trying to have the charging port replaced.

4. Test a wireless charger

Given that your iPhone supports wireless charging, and you have a wireless charger, this is an easy way to test if the iPhone charging problem is related to the phone or charging accessories. Just try to charge your iPhone with a wireless charger. This could also be a temporary solution to keep your phone working until you figure out the problem and get it fixed. You might have a bigger battery-related issue if your iPhone isn’t charging.

5. Try a different power outlet

Plug something else into the same outlet you’re trying to charge your iPhone with and see if it works. Sometimes wall sockets malfunction, or a section of your home might have electric problems. Additionally, some power sources can be weak. If you find issues with your outlet, try other outlets in the house.

Those trying to charge using a USB port in a computer or power strip might not be getting the juice the iPhone needs to charge correctly. Move to a regular outlet and see if this gets rid of your charging woes.

6. Turn your iPhone off or force restart

This is a magical fix for all things tech, and it works most of the time. Sometimes a simple restart will get all your phone’s gears in place and have it charging properly. Turning off your phone completely might also help your iPhone battery charge better. Any heavy usage or background processes can affect charging performance. Turning your phone off will leave all resources clear so your device can focus solely on charging. To restart your iPhone, follow the steps below:

1. Press and hold on to the Power button and either of the volume buttons.
2. Drag the power off slider from left to right to turn off your iPhone.

Alternatively, you can follow the steps below to Power off your iPhone:

1. Open Settings.
2. Go into General.
3. Select Shut Down.

To force restart your iPhone, follow the steps below:

1. Quickly press and release the volume up button.
2. Press and quickly release the volume down button.
3. Press and hold the side button until the Apple logo appears on the screen.
4. Release the Side button.

7. Did you completely deplete your iPhone’s battery?

Your phone needs at least a bit of power to continue operating correctly. Devices actually turn off a bit before the battery reaches zero, just so they can have some energy to manage things next time you turn them on, or even while turned off, charging. It’s common to run into problems when you deplete batteries completely. Luckily, those in this position are the luckiest of the bunch, as it’s not really a serious problem to deal with.

You’ll have to be more patient and leave the iPhone plugged in for a longer time. Eventually, the iPhone will wake itself back up and start receiving a charge.

8. iPhone not charging past 80%?

If you notice your iPhone stops charging at 80%, that’s actually a feature called optimized battery charging that helps reduce battery aging that’s at work. But it is possible to turn off the feature.

1. Head over to the Settings app on your iPhone.
2. Tap Battery.
3. Tap Battery Health & Charging.
4. Turn off Optimized Battery Charging as per your needs.

9. Check for iOS updates

If your iPhone is not charging, a simple, yet effective solution might be to check for iOS update. Of course, this is given you have some power to go through the upgrading process. Just follow the steps below:

1. Go to Settings.
2. Tap General.
3. Select Software Update.
4. If an update is available, follow the onscreen instructions to upgrade your iPhone.

10. Did your iPhone drop in water?

Water and electrics don’t mix and even water-resistant phones need special care to keep them watertight. If your iPhone has gotten wet and you’re now wondering why it won’t charge, then it’s highly likely that water is the culprit.

You shouldn’t charge your phone at all if there’s a possibility of water damage. First, you have to make sure your phone’s internals are completely dry.

There are various methods to save a phone if it dropped in water. You can blow hot air into it with a hairdryer, dump it in a bowl of rice, or try other methods. You will, though, have to wait at least a day before plugging your phone in again.

After 24 hours of drying off, try plugging your phone in and see what happens. Once the connections are dry you may find that it starts charging again.

11. iPhone not charging due to hardware problems?

There isn’t much you can do if your iPhone is not charging because of hardware problems. Contact Apple Support or an authorized service center to repair any issues with the charging port, Battery or other hardware problems. You might need to get a replacement if a repair isn’t possible.

Successfully fixed iPhone not charging issue

I hope your iPhone charging problem is now behind your back. Next time your iPhone stops charging, start working through the usual suspects, such as inspecting the charging cable, charging adapter, wall socket, restarting your iPhone, updating iOS, etc. More extreme measures include checking for hardware issues, and contacting Apple Support.

Is your iPhone microphone not working? Work your way through these eleven fixes to get your iPhone microphone working again.

The problem of iPhone microphone not working is not new as it has existed on almost all iPhone models. The issue has affected many iPhone models, including iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhone XS, XS Max, iPhone 11, 11 Pro, 11 Pro Max, iPhone 12, 12 mini, 12 Pro, 12 Pro Max, iPhone 13, 13 mini, 13 Pro, 13 Pro Max, iPhone 14, iPhone 14 Plus, iPhone 14 Pro, iPhone 14 Pro Max and iPhone SE.

There’s no need to panic if your iPhone microphone is not working. It is either a software issue or a hardware issue, and there are various possibilities you can methodically work through to isolate and solve the problem. Having a panic attack is not one of those possibilities! Scroll down below to start trying out different possible solutions. You may strike lucky and get it working again after the first try.

First and foremost, let’s figure out the possible causes of the iPhone microphone not working issue. Once that’s done, we will move on and detail each solution.

Why is iPhone Microphone not working?

There are many reasons why your iPhone microphone is not working. The problem may be Bluetooth or app-related, the iOS could be out-of-date, or something is blocking or interfering with the iPhone’s microphone preventing it from functioning properly. Usually, the exact problem only reveals itself through its corresponding fix.

Before we dive into the troubleshooting steps, lets first go through the procedure to establish which iPhone microphone is not working. After that, we will guide you through various troubleshooting steps that will hopefully fix your iPhone microphone problems.

iPhones have three microphones – one at the top, one at the rear and the third one at the bottom.

To check the front and rear microphone, just record two quick videos using the selfie and back camera and check the audio. For the bottom microphone, open the voice memo app on the iPhone and capture a voice note holding the microphone close to your mouth. Play that note and check if the audio is crystal clear or not. If you find your voice fading or cracking in the middle, then your iPhone’s microphone needs looking into.

Now that you have the basics cleared, let’s jump to the troubleshooting steps.

How to fix iPhone microphone that’s not working

1. Make Sure Nothing is Covering Your iPhone’s Mic

The vast majority of people use third-party cases to protect their iPhones. The legit ones are fine but if you are using a cheap case from an unknown vendor then make sure the holes at the bottom of the case are precise with the ones on your iPhone. If the holes are not aligned, they will end up covering your iPhone’s microphone leading to quality issues with the microphone. Check the bottom, front, and back microphone openings to ensure these openings aren’t covered, blocked, or obstructed in any way.

2. Restart communication apps

If the case isn’t the cause of your iPhone microphone problem, then restarting communication apps is your next step. This is particularly helpful if the iPhone microphone doesn’t work with apps like WhatsApp, Zoom, FaceTime, and Skype. Simply close the app and open it again. This is extremely easy to do. Follow the steps below:

1. Swipe up from the bottom of the screen until you see smaller versions of each of your open apps.
2. Swipe up on the app window. This will close down the communication app you are trying to use the microphone on.

Of course, to open the app again, just tap the app icon on your home screen.

3. Restart your iPhone

Now it’s time to restart your iPhone. We very rarely restart our phones these days, so perhaps the old “have you tried turning it off and on again?” routine is merely all you need.

With the modern versions of iPhones, all you need to restart the device is to simultaneously hold the volume down button and the power button. When the slide to power off option appears on-screen, swipe right. Wait 15—20 seconds before restarting.

Alternatively, follow the steps below:

1. Start the settings app.
2. Select General.
3. Tap Shut Down.
4. Wait for a minute or two before turning your iPhone back on.

4. Give apps microphone access

Apps like Zoom, Meet, and Teams will ask for microphone permission upon startup. If you have accidentally denied the permission, the app won’t be able to utilize the iPhone’s microphone to function as expected. Make sure the app has permission to access the microphone. To do this, follow the steps below:

1. Go to Settings.
2. Select the respective app to view its settings, then make sure Microphone is switched On.

Alternatively:

1. Go to Settings .
2. Tap Privacy & Security.
3. Tap Microphone.
4. The list shows the apps that requested access. You can turn access on for any app on the list.

If giving permissions does not solve it, and if you are having microphone issues for specific apps, like Skype, Zoom, WhatsApp, etc, it is possible that the app itself is faulty. If this is the case, there are three things you can try:

• Does this app have a microphone or sound settings? Check these settings and make sure that they are set correctly.
• Delete the app from your iPhone and then reinstall it.
• Contact the developer of the app.

5. Check if your iPhone is stuck on headphone mode

If you use wired earphones on your iPhone, in rare times, your phone may get stuck in headphone mode. When this happen, even after you have unplugged the wired earphones, the iPhone still thinks they are connected to one and may assume to take audio input from those mics instead of its own.

Plug in a pair of headphones and unplug them again. This seems fairly obvious, but doing so could prompt your iPhone to recognize that the headphones have been unplugged this time, thereby taking it out of headphone mode.

6. Disconnect All Bluetooth Devices

If you find your iPhone microphone not working after trying the above solutions, make sure that you’re not connected to any of the nearby Bluetooth devices. This is because connections to nearby Bluetooth speakers, headphones, and other devices can disable the built-in microphone on your iPhone 14 and use the microphone on the Bluetooth peripheral instead. This happens to me all the time. My wireless earbuds Funcl AI when sitting idle in the charging case, automatically turn on and connect to my iPhone. So, when I receive a call on my iPhone, the device sends it to the connected device and I can’t hear the other person. This can also happen to you if your iPhone is connected to an external Bluetooth speaker or to your car’s infotainment system.

It is always recommended that you manually disconnect Bluetooth devices from your iPhone in such scenarios from the control center to avoid such issues. To do this, go to to the iOS Control Center and tap on the Bluetooth toggle once, if it’s enabled. This will disconnect you from all Bluetooth devices for 24 hours.

7. Update iOS

Is your iPhone microphone still refusing to work? Then check to see if you are running the latest version of iOS. To update your iPhone, follow the steps below:

1. Open settings.
2. Navigate to General.
3. Select Software Update option to download and install any available updates.

8. Clean the gunk out of the microphone

If you have your iPhone in your pocket regularly, then it’s probable that the microphone is blocked with pocket gunk. You know, bits of skin, dust, lint, and whatever else you’ve got going on there in your pocket. Those tiny microphone holes will get filled up in no time, and before you know it, your friends won’t hear you during phone calls.

You can clean those microphone holes by simply blowing into them really hard, and giving the device a good shake. Alternatively, get a can of compressed air and give those holes a good blast and a good shake. Maybe also consider cleaning your pockets on a more regular basis?

9. Reset all iPhone settings

If you’ve got this far, then you’re heading into the nuclear options, as it’s time to start resetting things. The easiest reset option is to reset all the settings. This does not wipe your content, such as your photos and music. It merely resets things like your network settings, location and privacy settings, and so forth. It’s pretty simple to reset your iPhone settings. Just follow the steps below:

1. Start the Settings app on your iPhone.
2. Tap General.
3. Choose Transfer or Reset iPhone.
4. Select Reset
5. Hit Reset All Settings.

10. Factory reset the iPhone

Nobody wants things to get this far, as erasing the entire phone and going back to factory settings is a major pain in the rear. You have to make sure you have a viable backup and then sit and wait for the phone to do its thing. But if the previous tips haven’t worked to get your iPhone microphone working again, then you likely have no choice.

1. Go into Settings.
2. Hit General.
3. Select Transfer or Reset iPhone.
4. Choose Erase all Contents and Settings.

11. Contact Apple Support

If your iPhone microphone doesn’t work after trying all of the above fixes, then it is likely time to contact Apple Support. You will most likely have a hardware issue that can only be fixed by Apple. If you still have a valid warranty on your phone, you may even be able to get the phone replaced if the camera problem is not fixable.

Successfully fixed iPhone microphone not working issue

I hope your iPhone microphone problem is now behind your back. If any of your iPhone microphone is not working, start working through the usual suspects, such as taking off the phone cover, restarting your iPhone, updating iOS, etc. More extreme measures include resetting iPhone settings, factory resetting the whole phone, checking for hardware issues, and contacting Apple Support.

Is your iPhone camera not working, just showing black screen? Check out our troubleshooting guide to fix the issue.

Note: information in this article apply to iPhone 14, iPhone 13, iPhone 12, iPhone 11, iPhone X, iPhone 8, iPhone 7,, iPhone 6S and iPhone SE.

The camera is probably one of the most-used features on the iPhone. Everyone loves to capture memorable moments, take selfies, and share their daily lives through a camera. It’s a great and convenient tool—which is why when you’re faced with an error that prevents you from taking pictures or videos, it can be frustrating to deal with.

So if your iPhone camera has stopped working, just showing black screen, here are ways to fix the problem.

How to Fix iPhone Camera Black Screen Issue

If you launch the Camera app on your iPhone and see a black screen, try the following troubleshooting steps to fix the issue:

1. Make sure your iPhone’s camera isn’t blocked

If your iPhone camera is showing black screen, your first step should be to make sure the camera lens are not obstructed in any way.

First, make sure your hand or fingers aren’t blocking the lens. It’s easy to do, especially when you’re excited to capture that perfect shot. Second, if your iPhone camera is showing a black screen instead of the viewfinder, please double-check to make sure that the case is installed correctly! If your case is upside down, it could be blocking the camera on your iPhone.

If everything looks okay, move on to the next solution.

2. Force Quit the Camera App and Relaunch It

At times, you can fix the iPhone camera black screen issue by force quitting the camera app and relaunching it. So, make sure to try this nifty trick before trying the other solutions below.

1. Swipe up from the bottom of your iPhone to reveal the app switcher.
2. Swipe up on the camera app to close it.
3. Relaunch the camera app and see if it’s working as expected.

3. Restart your iPhone

As simple as it may sound, sometimes errors can be corrected by restarting your iPhone. This will refresh all your apps and gives the camera software another chance to run without errors. Thus, the next step to fix iPhone Camera black screen problem is to restart the phone itself. Here is how:

1. Open the Settings app on your iPhone.
2. Tap General.
3. Select Shut Down.
4. Power on your iPhone and check if the camera is working as expected.

4. Switch Between the Front and Back Camera

In some occasions, you can resolve the iPhone camera black screen problem by just switching between the front and rear cameras. You can do that by just tapping on the camera switcher icon.

5. Ensure That the Cameras are Clean

If you are not aware, dust or the pile-up of smudge are also capable of inhibiting the iPhone’s camera from working properly. If you haven’t cleaned your iPhone for a while, there is a good chance that the pileup of dust could be blocking the cameras. Thankfully, it’s pretty easy to clean iPhone’s cameras.

Simply grab a soft lint-free cloth and clean both the front and back cameras. If the dry cloth is unable to get rid of the dust, slightly dampen the cloth in water and then try removing the dust.

6. Update IOS

Although the iPhone camera is a hardware component, software issues can cause the camera to show black screen. You should therefore make sure your iPhone is running the latest version of iOS. This helps to fix minor Camera glitches including black screen issue. Follow the steps below:

1. Open the Settings app.
2. Go into General.
3. Select Software Update.

Note: If no update is available,you can rule this out as the reason for iPhone camera black screen issue.

7. Avoid overheating

When an iPhone gets too hot, some apps don’t work properly. If this happens, you should see an on-screen message stating the iPhone needs to cool down before you use it. If you see this message, turn off your iPhone for a few minutes to give it a chance to cool. If you haven’t seen this message but your iPhone feels hot to the touch, power it off.

Even as few as 10 minutes can make a difference in the temperature of your phone. However, if it begins to overheat again for no apparent reason, go to your local Apple Store or the Apple Support website for repair or replacement details.

8. Reset All Settings

If your iPhone camera is still showing black screen, try resetting all the settings on your phone. This option will only erase your settings—your saved files and other personal data will still be available after you restart your device. Follow these steps to reset all settings:

1. Start the Settings app.
2. Go into General.
3. Select Transfer or Reset iPhone.
4. Choose Reset.
5. Hit Reset All Settings.

9. Perform a factory reset

A factory reset may fix the iPhone camera black screen issue you are facing, but this should be your last resort. Before you reset your device, you should back up your iPhone, since everything except for the original software and apps will be erased. Follow these steps to reset all settings:

1. Start the Settings app.
2. Go into General.
3. Select Transfer or Reset iPhone.
4. Choose Erase all content & settings.

10. Repair options

If the iPhone camera black screen issue persists, the camera may be damaged. If you suspect the camera may be broken or have a defect, consider having it serviced by Apple.

The problem may be with the camera hardware components, or it may be internal damage. If you’ve dropped your iPhone on the ground or you suspect that it may have water damage, these could be potential causes for camera hardware failure. Contact Apple Support to arrange a hardware repair at the Apple Store or at an Apple Authorized Service Provider. If your iPhone is out of warranty, you may need to pay for this repair yourself.

Successfully fixed iPhone Camera black screen issue!

Now you know how to troubleshoot the problem if your iPhone camera is not working or showing black screen.